------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Barbara Jensens
Please DO NOT use without a proper License
Visit her site HERE, to purchase
Kit: Holiday Treats by Rieka @ Rieka Rafita
Vist her blog HERE
Font=Pharmacy
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open Frame 1, shift D to duplicate
Re-size canvas to 800 x 800, will crop it later
Highlight the frame layer then select none
With your magic wand, click in the center of the frame
Now, go to selections, modify, expand
Use the following settings
Open paper 7, copy and paste as a new layer, inverte and delete, select none
Now move this below the frame layer
Select the frame layer, apply a drop shadow using the folling settings
Open tube of choice, place it below the frame layer
Duplicate it and bring copy above frame then hide it
On duplicate layer, erase any part of the tube that is hanging over the frame.
Use my tag as and exapmle, she should be looking as if her legs are the only things hanging out.
Open Teddy Bear, re-size by 50%, copy and paste as a new layer, use my tag as placement
Open Light, re-size by 75%, copy and paste as a new layer, use my tag as placement
Open sparkle 1, mirror, copy and paste as a new layer, use my tag as placement
Open Peppermint 2, re-size by 50%, copy and paste as a new layer, use my tag as placement, make sure it is below the teddy bear and your tube
Open Christmas Ball 2, re-size by25%, copy and paste as a new layer, use my tag as placement
Using a font of choice, I used Infant, type out Holiday Treats
Use my tag as example of placement
Crop image to your preference, re-size so that its no longer than 650 on the longest side
Add any other element of your chosing
Add copyright layer
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 30, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Elias Chatzoudis
Please DO NOT use without a proper License
Visit PTE HERE, to purchase
Template: Template 114 by Ali @ Dezigns by Ali
Visit her blog HERE
Kit: University Xmas by Missy @ Scraps with Attitude
Vist her blog HERE for Purchase detail
Font=Pharmacy
Plugins=Gradient Glow
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, shift D to duplicate, close orignial
Delete copyright layer
Re-size canvas to 800 x 800, we will crop and re-size later
Merge the snowflake layers together
Open paper 2
Highlight Raster 2 layer, copy and paste paper as a new layer, invert and delete, select none and merge down
Open paper 1
Highlight Raster 1 layer, copy and paste paper as a new layer, invert and delete, select none and merge down
Highlight Raster 3, flood fill it with a color from paper 1
Apply noise using the following settings
Highlight Raster 4, flood fill it with a color from paper 2
Apply noise using the above settings
Copy and paste tube of choice
Move one till it is on the left side, duplicate tube and mirror
Merge these two layers into one
Open UOX 19, re-size by 75%
Copy and paste as a new layer, use mine as an example
Open UOX 21, re-size by 25%
Copy and paste as a new layer, use mine as an example
Now apply a gradient glow to this layer, using the following settings
Open UOX 61, re-size by 25%
Copy and paste as a new layer, use mine as an example
Duplicate and mirror, merge down
Apply a drop shadow with the following settings
Repeat
Open UOX 72, re-size by 25% and the by 50%
Copy and paste as a new layer, use my tag as an example
Open UOX 13, copy and paste as a new layer
Move this layer to the bottom
Open UOX 33, re-size by 25%
Copy and paste it as a new layer, use my tag as an example of placement
Open UOX 34, re-size by 25%
Copy and paste it as a new layer, use my tag as an example of placement
Add any other element you would like
Add drop shadow anywhere you would like
Crop image and re-size so that it's no larger than 650 on the longest side
Add copyright
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 15, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Barbara Jensen
Please DO NOT use without a proper License
Visit her site HERE, to purchase
Template: Magic of Winter by Annu
This was part of a Misfit Blog Challenge
Visit the Creative Misfit blog HERE
Kit: Winter Wishes by Creative Intentionz
Visit her blog HERE for Purchase detail
Font=Chopin
Plugins=Fritillary
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, shift D to duplicate, close original
Delete copyright and background layers
Open paper 5
Highlight square 1 layer, copy and paste as a new layer, invert and delete, select none and merge down
Repeat the steps above to square 2 layer
Highlight the circle layer, select none
Now apply Fritillary using the following settings
Click on the image below, I've got to redo these help images
Copy and paste tube of choice
Make sure to post the tube below the word-art layer
Open Polar Bear 2, re-size by 75%, mirror
Copy and paste as a new layer, paste toward the bottom of the tag, use mine as an example
Open Snow element, re-size by 75%
Copy and paste as a new layer, move this layer just above shapes from the templates
Open Ribbon 2, re-size by 75%, invert
Copy and paste as a new layer, use my tag as example of placement
Open Bow 2, re-size by 50%
Copy and paste as a new layer, use my tag as example of placement
Open Button 3, re-size by 15%
Copy and paste as a new layer, use my tag as example of placement
Add a slight drop shadow as desired
Add any other element of your choosing
Crop image and re-size so that it's no longer than 650 on the longest side
Add copyright
Save as a PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 15, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Kit: Harvest Delight by Staceys Deigns
Visit her blog HERE for Purchase detail
Font=Pharmacy
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open a blank 800 x 800 canvas
Open Window Frame, re-size by 50%, copy and paste as a new layer
Highlight the window frame layer, the select none
Take your magic wand and click in the center of the frame, selections, expand
Expand it by 5
Open paper 1, copy and paste as a new layer, invert and delete, select none and merge down
Open Give Thanks Sign, copy and paste as a new layer, use my tag as an example
Open Ivy Spray 2, copy and paste as a new layer
Duplicate Ivy and mirror, then merge down, move this below the Sign layer
Apply a drop shadow of choice
Open Pilgrim Girl, re-size by 50%
Copy and paste as a new layer, move to the right of the window
Repeat with Pilgrim Boy
Merge both Pilgrims together and apply a drop shadow of choice
Crop image of choice, re-size so that it isn't longer than 650 on the longest side
Add anything of choice
If you don't use a tube then give credit to Stacey
©Staceys Designs http://staceysdesigns.blogspot.com/
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 15, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Ismael Rac
Please DO NOT use without a proper License
Visit his site HERE, to purchase
Template: Crazy Bitch by Cakes at Crazy Cakes Scraps
Visit her blog HERE
Kit: GirLyLiCious by Rieka Rafita
Visit her blog HERE for Puchase detail
Font=Pharmacy
Plugins=Gradient Glow
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, Shift-D to duplicate, close original
Delete copyright layer
Open paper 4
Highlight layer 5, copy and paste paper as a new layer, invert and delete, select none and merge down
Repeat above steps on layer 10
Open paper 5
Highlight layer 3, copy and paste paper as a new layer, invert and delete, select none and merge down
Open paper 18
Highlight layer 9, copy and paste paper as a new layer, invert and delete, select none and merge down
Repeat above steps on layer 2
Open paper 2
Highlight layer 6, copy and paste paper as a new layer, invert and delete, select none and merge down
Highlight layer 10
Copy and paste tube of choice, moving it until you are satisfied
Duplicate tube and close visibility on it
Click on original copy and invert and delete, merge this layer down into layer 10
On the duplicate tube layer, use your eraser tool and erase any of the tube that is outside of the cicle
Highlight layer 8, flood fill with color from your tube, Change the blend mode to Overlay
Paste a closeup of tube of choice, invert and delete, select none
Change the blend mode to Luminance(L) and the opacity to 68%
Click on layer 1 and flood fill with the same color you used before, apply noise using the following settings
Repeat above steps on layer 4
Move the Bitch word-art from behind your tube and merge the two word-art layers into one
Flood fill the word-art with a dark color, I used black
Apply a gradient glow using the following settings
Apply a drop shadow using the following settings
Open Crown, re-size by 50%
Copy and paste as a new layer, use my tag as example of placement
Using the settings above, apply a drop shadow, repeat
Open Mask, re-size by 75%
Copy and paste as a new layer, use my tag as example of placement
Using the settings above, apply a drop shadow, repeat
Open String Heart, copy and paste as a new layer, apply a drop shadow
Open Sparkle 3, copy and paste as a new layer, move till your satisfied
Crop image to your liking.
Re-size so that it's no larger than 650 on the longest side
Add any other element of your liking
Add your copyright
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 15, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Keith Garvey
Please DO NOT use without a proper License
Visit PTE HERE, to purchase
Template: Template 43 from Melissaz Creationz
Visit her blog HERE
Kit: Goddess by Kaci at Scrappin Krazy Designs
Visit her blog HERE for purchase info
Font=Basilika
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, shift D to duplicate it, close original
Delete copyright layer, re-size canvas to 700 x 700
This will give you a lot of room, we will crop and re-size later.
Open paper 16, Highlight Circle layer, copy and paste as a new layer
Invert and delete, select none and merge down
Open paper 8, Highlight rectangles layer, copy and paste as a new layer
Invert and delete, select none and merge down
Open paper 1, Highlight square layer, copy and paste as a new layer
Invert and delete, select none and merge down
Highlight Circle frame, choose a color from the circle and flood fill it.
Now apply noise with the following settings.
>
Now repeat these steps, changing colors to suit you to the other frame layers
Apply noise using the settings above
Apply a drop shadow to every frame layer, use the following settings
Highlight the swirls layer, choosing a light color, flood fill
Highlight the circle layer
Now open tube of choice, copy and paste as a new layer
This works better if you have a closeup of the image
Invert and delete, select none and merge down
Now change the Blend mode to Luminance (L)
Change the opity to 92%
Copy and paste tube as a new layer
Open boot, re-size by 50%
Copy and paste as a new layer, move to the left of the tag, use mine as an example
Open bunny, re-size by 50%
Copy and paste as a new layer, move to the left of the tag, use mine as an example
Open sparkle 1, copy and paste as a new layer
Move this below the circle layer
Open car, re-size by 50%
Copy and paste as a new layer, move to the right of the tag, use mine as an example
Open ciclewire, copy and paste as a new layer, add this layer at the bottom of the tag
Using your Raster Deform tool, make the wire larger, use mine as an example
Crop your image, re-size so that it's no larger than 650 on its longest side
Add any other element you like.
Add copyright info
Save as png file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 01, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Template: Template 25 by Yvette @ Essence of Creativity
Looks like her blog is down at the moments
Kit: A Pastel Christmas by Crystal's Creations
Visit her blog HERE for purchase details
Mask: Mask 301 by Vix
I know the mask number but can't find it on her blog.
Visit her blog HERE
Font=LaBrit
Plugins=Fritillary & Gradient Glow
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, shift-D to duplicate, close original
Delete copyright layer, re-size canvas to 800 x 800, we will crop later, I like having a lot of room
Hide background layer
Highlight Small Rectangle Layer
Open Paper 12, copy and paste, invert and delete, select none and merge down
Highlight Large Rectangle Layer
Open Paper 2, copy and paste, invert and delete, select none and merge down
Apply the following noise
Highlight thin rectangle layer
Open Paper 4, copy and paste, invert and delete, select non and merge down
Apply the following Fritillary
Open Santa 3, re-size by 50%
Copy and paste as a new layer, move to the left of the tag
Open Christmas tree, re-size by 25%
Copy and paste as a new layer, move this layer to the bottom layer
Adjust the placement using mine as an example.
Open Sign, re-size by 25%
Copy and paste as a new layer, place this on the right hand of the tag
Use mine as example
Open Flower 1, re-size by 8%
Copy and paste as a new layer, move it to the bottom of the pole
This will help cover any edges where the pole meets the tag temp.
Open Reindeer 1, re-size by 75%
Copy and paste as a new layer, position using my tag as an example
In a font of your choice, type a holiday greeting
For mine I used LaBrit font and typed Happy Holiday
Using a color from my tag as my foreground and black as my background
Now apply a Gradient Glow of choice, but see below for my settings
Now apply a drop shadow, see my settings below
Add a blank new layer as the very bottom layer
Flood fill this with a color from the tag
Apply mask, merge group
Repeat those steps with a different color
Now move the second layer so that the two masks are not on top of each other
Crop you image as you like and re-size making sure it's no larger that 650 on the longest side
Add name and any other item that you would like.
If you do not use a tube, like me please add the following copyright
©Crystal's Creations http://crystalsscrapcreations.blogspot.com/
However if you do, please use the appropriate copyright
Save as a PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on December 06, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
Sooooo. I decided to put my blog out there. To do this I need your help. So please, click below and vote. Vote daily. Thanks a bunch guys. Hugs
*************************************************
When four of Santa's elves got sick, the trainee elves did not produce toys as fast as the regular ones, and Santa began to feel the Pre-Christmas pressure.
Then Mrs. Claus told Santa her Mother was coming to visit, which stressed Santa even more.
When he went to harness the reindeer, he found that three of them were about to give birth and two others had jumped the fence and were out, Heaven knows where.
Then when he began to load the sleigh, one of the floorboards cracked, the toy bag fell to the ground and all the toys were scattered.
Frustrated, Santa went in the house for a cup of apple cider and a shot of rum. When he went to the cupboard, he discovered the elves had drunk all the cider and hidden the liquor.. In his frustration, he accidentally dropped the cider jug, and it broke into hundreds of little glass pieces all over the kitchen floor. He went to get the broom and found the mice had eaten all the straw off the end of the broom.
Just then the doorbell rang, and an irritated Santa marched to the door, yanked it open, and there stood a little angel with a great big Christmas tree.
The angel said very cheerfully, 'Merry Christmas, Santa. Isn't this a lovely day? I have a beautiful tree for you. Where would you like me to stick it?'
And so began the tradition of the little angel on top of the Christmas tree.
Not a lot of people know this.
*************************************************
6 September 1939 - 21 November 2010
Hello Maina Stalkers. With a very heavy heart I post this.
On Sunday, November 21, 2010, my mother-in-law Betty Wilson passed away. She has been extremly sick for a very long time.
For as long as I've known her she had a very bad heart. But for the past few years it has gotten worse. Most of this year she has spent it either in a Rehab or a hospital. We all knew that she woudln't surive the year. Watching her suffer took a toll on my husband and myself. So it's nice to know that she is finally at peace.
I don't have any pics I can post here. I might have to search to find some. I just wanted to share this with you all.
As my last rite for her I pass this to her:
Time has passed, the Wheel has turned.
It is time for me to move on.
I will walk hand in hand with the Ancient Ones,
and with my ancestors who came before me.
Great Mother, welcome me back into your womb,
I come to you and know I am blessed,
for my life has been one I am proud of.
As I enter your world, wrap me in your loving arms,
and welcome me.
Lord of Death, I wait for you to take me,
I come to you willingly, with eyes wide open,
as my last moment approaches on the horizon.
May I look upon you without fear, without pain,
and knowing that those who walked before me,
await me on the other side.
O Ancient Ones, give me strength to take these final steps,
and allow me to do so with peace and dignity.
Let my family mourn my passing but not my loss,
and let them heal knowing I will see them again.
Time has passed and the Wheel has turned.
It is time for me to move on.
So Mote It Be
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Ismael Rac
Please DO NOT use without a proper License
Visit his store HERE, to purchase
Template: Template 74 by Dezigns by Ali
Visit her blog HERE
Kit: Blue Christmas by Creative Intentionz
Visit her blog HERE for purchase details
Font=Kingthings Christmas
Plugins=Xero Fritillary
------------------------------------------------------------------------------
------------------------------------------------------------------------------
open template, shift-D to duplicate, erase copyright layer,
re-size canvas to 800 x 800, we will re-size later, I like to have plenty of room to work
Highlight the circle layer
Open paper 10, re-size by 60%, copy and paste, invert and delete, select none, merge down
Highlight Frame layer
Flood fill with a dark color, I used a color from Paper 10
Apply noise with the following settings
Apply a drop shadow with the following settings
Repeat Drop Shadow
Click on flake layer, apply a drop shadow with settings above
Open tube of choice and place it on the right side of tag, use my tag as an example of placement
Apply drop shadow using the settings as above, repeat
Open Wordart, re-size by 50%, copy and paste as a new layer, position toward the bottom of the tube
Apply drop shadow using the settings as above, repeat
Open Snowballs, copy and paste as a new layer, move till it is below your tube layer
Apply drop shadow using the settings as above
Open candy cane, re-size by 50%, copy and paste as a new layer, position on the left side of tag, use my tag as an example of placement
Apply drop shadow using the settings as above, repeat
Open Bow 2, re-size by 50%, copy and paste as a new layer, position it toward the bottom of the tag, use my tag as an example of placement
Apply drop shadow using the settings as above
Open Sparkles, re-size by 75%, copy and paste as a new layer just above the circle layer
Change blend mode to Overlay and opacity to 58%
Add any other element you would like
Crop image to your liking, re-size if needed making sure it is no longer than 650 on the longest side
Add copyright information
Save as a PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on November 24, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Keith Garvey
Please DO NOT use without a proper License
Visit PTE HERE, to purchase
Template: Template 88 by Yvette at Essence of creativity
Looks like her blog is down at the moment
Kit: Garv's Board Sk8tr by Missy at Scraps With Attitude
Vist her blog HERE for details on how to purchase
Font=Barrista
Plugins=Fritillary
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, shit-d to duplicate, close out original one
delete the copyright layer, background layer and text layer
re-size canvas so that its 800X800 we will crop image layer, I like having a lot of room to work with
highlight pink square layer
open paper 5, re-size it to 600x600, copy and paste as new layer, invert and delete, select none, merge down
highlight frames layer
open paper 20, copy and paste as new layer, invert and delete, select none, merge down
Now apply Fritillary to the layer using the following settings
You'll have to click on the following image, I'll redo this in time
Highlight Large Oval layer
open paper 17, copy and paste as new layer, invert and delete, select none, merge down
Now apply a inner bevel
Go to Effect, 3-D Effect, Inner Bevel, use the following settings
Highlight Black Rectangle layer
Open Paper3, re-size by 600x600, copy and paste as a new layer, invert and delete, select none, merge down
Open Tube of choice
Highlight large oval layer, copy and paste tube, move to where you would like it to appear
Now duplicate your tube and close out the visibility of the tube copy
Making sure that the bottom tube image is the one you are on, invert and delete, select none
Now more the tube copy to the top layer, un-check the visibility, now you will see the tube again
Take your eraser and erase any tube that is outside of the oval, use my tag as reference
Open Skateboard 2, re-size by 50%, copy and paste as a new layer, position toward the bottom of the tag
Apply a drop shadow using the following settings
Open button bow 3, re-size by 30%, copy and paste as a new layer, move to the side of the tag, use my tag as an example
Duplicate image, then mirror
Open flower 1, re-size by 15%, copy and paste as a new layer, move to the side of the tag, use my tag as an example
Duplicate image, then mirror
Add any other element that you would like
Crop image and re-size it so that it is no longer than 650 on the longest side
Add copyright
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on November 17, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Kit: Thanksgiving by Crystal @ Crystals Creations
Visit her blog HERE for details on how to purchase
Stock Photo: Fall/Harvest picture of choice
Remember to give credit
Font=Black Chancery
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open a blank 800 x 800 canvas
Open frame 4, copy and paste as a new layer, this should be in the center of your canvas
Highlight frame layer, select none
Take your magic wand and click in the center of the frame,
Selection, Modify, Expand, use the following settings
Open paper 9, copy and paste as a new layer, invert and delete, select none
Open Harvest wordart, copy and paste it as a new layer, move toward the bottom of the frame
Add a drop shadow using the following settings
Open Pilgrim 1, re-size by 50%
Copy and paste this as a new layer below the harvest layer
Open Pilgrim Girl, re-size by 50%
Copy and paste this as a new layer below the harvest layer
Merge the two layers together, now duplicate the layer and move it above the harvest layer
Using your eraser, erase the dolls until only their arms are on top of the harvest layer
Use my tag as an example
Open stock photo, re-size it down until its no longer than 500 on the longest side
Highlight frame layer again, select none
With your wand, click on the center of the frame
Copy and paste stock image, invert and delete, select none
Change your Blend Mode to Luminanace (L)
Open bow 3, re-size by 75%, copy and paste as a new layer, move to the top of frame
Crop image to your liking, re-size so that its no longer than 650 on the longest side
Add any other elements you would like
Add copyright layer
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on November 16, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
/a>
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:
Tube of choice: However I am using Al Rio
Please DO NOT use without a proper License
He is currently in a number of stores.
Visit his site HERE, click on links in the left hand column.
That will show you where to purchase his tubes.
Template: Template 12 by Deb at Creative by Nature
Visit her blog=HERE
Kit: Mint Choc Chip Scrap Kit by Creative Intentionz
Vist her blog HERE for purchase detail
Font=LaBrit
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Open template, Shift-D to duplicate, delete copyright, close original
Re-size canvas to 800 x 800, we will crop and re-size again later
hide the background layer
Highlight Inside Frames layer
Open paper 10, copy and paste as a new layer, invert and delete, merge down
Highlight Raster 2 layer
Open paper 1, copy and paste as a new layer, invert and delete, merge down
Highlight Raster 1 layer
Open paper 3, re-size it by 60%, copy and paste as a new layer, invert and delete, merge down
Open Knot 2, re-size by 55%, copy and paste as a new layer, place it at the bottom of the frame, use my tag as example
Open Tag 2, re-size by 75%, copy and paste as a new layer, move it to the corner of frame
Highlight Frames Layer, choosing a color from your tube, flood fill the layer
Now apply noise using the following settings.
Open Binder Clip 2, resizy by 50%, copy and paste as a new layer, move so that it appears that the clip is actually clipped onto the frame
Duplicate and mirror
Open Doodle 1, copy and paste as a new layer, duplicate and mirror
You want them to look somehting like this
Merge down and move to the bottom layer
Add any other elements you would like
Crop image to your liking
Add name, I rotated the name using the following settings
Re-size so that it is no longer that 650 pixels on the longest side
Don't forget to add your copyright
Save as PNG file
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on November 15, 2010
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*************************************************
