Monday, August 24, 2015

Warning.

HELLO!!!!!!!!!!!!!!!

Good Morning Blog Walkers.

I know some of you are just as shocked as I am about this blog. I can't believe it is still here.
My plan in the next couple of weeks is to have it back up and running fully along with new stuff. Not sure how this is going to work. But I will try at least. 

All of my links are not working so I will have to re-upload them and get them all straight. So again please bare with me.

Thanks again,
Lost

Saturday, November 30, 2013

~ Under Construction ~

Hello to all my lovely stalkers.
I know it's been a long time since I was here.
A lot has happened.
After a lot of thought, I won't be deleting this blog.
That being said, I'm trying to redo it.
So please bare with me, it's going to look funky until I get it finished :)

Wednesday, April 10, 2013

:||: PTU TUT - Spring-Cited :||:



------------------------------------------------------------------------------
------------------------------------------------------------------------------
For full size click the above tag.
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:

Kit - Egg-cited for Easter by Disyas Digitals Designs
You can purchased this kit at The Scrappin Box 

Font - Ventography Personal Use Only
------------------------------------------------------------------------------
------------------------------------------------------------------------------
We are going to do something a little different with this one.
I will be using the kit and kit only.
We will be taking and changing a few thing to make an image/scene.
Going to be a bit different from what we are use to, be we can do it. 
So ready, let's get started

***Remember to save often***

Open Frame 9, Shift D to duplicate, change the name of the layer in the layer's list, close original

Change canvas size to 800 x 800, we will re-size later

Using your magic wand, click inside the frame; Selections-Modify-Expand-5

Open Paper2, re-size by 50%, copy and paste as a new layer, invert and delete, rename it background

Now open E10, copy and paste it as a new layer, place this layer below the frame

If you duplicated the layer, it will give it a darker look, so lets do that and merge the two together, changing the name of this to curtains

Using your eraser, earse the portion of the curtian that stick out and doesn't seem to look quiet right.

My curtains didn't cover the entrie window like I wanted so I duplicated and flipped

Using the eraser to get rid of anything I didn't like, then merged the two together, making only 1 curtain layer

Open E8, copy and past it as a new layer

Postiion it a littl to the left, use my tag as example of placement, rename it Fence

***Remember to save often***

Open MarySunshine6, copy and paste as a new layer

Mirror her so she looks like the girl in my tag

Open E58, re-size by 25%

Copy and paste as a new layer, I placed mine on the girls head so it would look sort of like a headband

Open E30, re-size by 50%, copy and paste as a new layer, use my tag for placement

Open E32, re-size by 50%, copy and paste as a new layer, use my tag for placement

Open E43, re-size by 25%, copy and paste as a new layer, use my tag for placement

I used E128 to create a mask sort of

Copy and paste as a new layer, move it so that it's the bottom layer, adjust it until your happy with the stars

Crop the image

Re-size total image so that it's no longer than 650 on it's longest side
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Now add your copyright

Add anything else you would like

Save image as a png file.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on April 10, 2013
All links were active at time of posting.
I would love to see your finished work. 
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------

Thursday, March 28, 2013

:||: FTU TUT - Easter Bunny :||:



------------------------------------------------------------------------------
------------------------------------------------------------------------------
For full size click the above tag.
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:

Tube of choice - However I am using Bits N' Bobs
Please DO NOT use without a proper License
Visit Pics For Design HERE, to purchase

Kit By Candy's Treats
Visit her blog HERE for DL info

Font - Bunny
------------------------------------------------------------------------------
------------------------------------------------------------------------------
***Remember to save often***

Open LuvEasterCluster1, ctrl-D to duplicate

Change Canvas size to 800 x 800, I like to work with plenty of space, we will re-size later

Using your magic wand, click inside each frame, Modify, Expand by 5

Open paper 2, copy and paste as a new layer, invert and delete, select none

Move the paper below frame, hide this layer for the moment

Click inside the top frame, repeating the steps to expand before

Open tube of choice, if your not using one with a close up then your tube will work

However I'm using one with a close up

Re-size close up so that it will fit, I did mine by 50%

Copy and paste tube, invert and delete, repeat, Use my tag as an idea

Merge these two layers together then duplicate

Mirror the duplicate layer and move it down to the second frame

Once down merge two layers together and move it below the frame layer

Change Blend Mode to Hard light and Opacity to 62%, un-click the frame background layer

***Remember to save often***

Open main tube and place into middle of tag, re-size if needed

Open heatspill, re-size by 75%

Copy and paste as a new layer, duplicate, mirror and flip, merge the two layers together

Open LuvEaster4 (word-art Easter with heart and eggs), copy and paste as a new layer

Use my Tag for placement

***Remember to save often***

Add anything else you would like

Apply drop shadow to any layer of choice, I always like to give a slight one to all layers

I use:
Offset Vertical - 0
Horizontal - -1
Attributes Opacity - 70
Blur - 6.00
Color - Black

Crop your image, getting rid of all excess canvas

Re-size so that the total image is no longer than 650 on it's longest side

Now add your copyright

Save image as a png file.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on March 26, 2013
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------

Sunday, March 17, 2013

:||: PTU - Degree Of Sarcasm :||:


------------------------------------------------------------------------------
------------------------------------------------------------------------------
For full size click the above tag.
This tutorial was written with a knowledge of PSP.
Any similarities to any other tutorial are purely accidental and not intentional.
Please do not copy or post on another site without permission.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
Supplies Needed:

Tube of choice: However I am using an Exclusive from PFD
Please DO NOT use without a proper License
Visit their store HERE for purchase details
   
Template: Kandi's Temp 81 - Visit her blog HERE

Kit: Black & White Tagger Size Kit by Diva Designz
Visit The Store HERE To Purchase

Font - Frosting for Breakfast
------------------------------------------------------------------------------
------------------------------------------------------------------------------
***Remember to save often***

Open template, ctrl-D to duplicate, close original

Re-size canvas to 800 x 800, I like having plenty of room to work, we will re-size later

Activate right black square layer

Open paper 7, copy and paste as a new layer, invert and delete, select none and merge down

Repeat with left black square layer

Activate Blue circle 1

Open paper 3, copy and paste as a new layer, invert and delete, select none and merge down

Repeat with Blue Circle 2 and Blue Circle 3 layers

Activate light pink circle layer

Open paper 5, copy and paste as a new layer, invert and delete, select none and merge down

Activate bright pink circle 1 layer

Open paper 8, copy and paste as a new layer, invert and delete, select none and merge down

Repeat with bright pink circle 2 & arrows layer

***Remember to save often***

Activate light pink circle

Paste tube of choice, duplicate, hide from view the duplicate

Back on the first tube, invert and delete, merge down

Now un-hide duplicate copy, move it up in the layers just below the word-art back layer

Take your eraser and erase any part of the tube that seems out of place, use my tag as example

***Remember to save often***

Activate left black square layer

Copy and Paste close up of tube, invert and delete

Duplicate this layer

One first layer, change blend mode to Luminance(L) and Obacity to 68%

Now on duplicate layer, change blend mode to Screen and Obacity to 72%

Repeat with the Right black Square

***Remember to save often***

Activate kandi word art layer

We are going to flood fill it with 2 different colors

First, to the word STUPID itself, flood fill white

To do this, make the entire canvas larger, try viewing it at 120

Then click on the letters themselves, making them white

Then on the lines above and below, color them black

***Remember to save often***

Now it's time to add the elements, use my tag for placement

Open crome leaf 2, Paste it as a new layer just below the tube layer

Open Heart Lock, Re-size by 15%, copy and paste as a new layer

Open Ribbon 1, Re-size by 50%, copy and paste as a new layer

Open Bow 2, Re-size by 25%, copy and paste as a new layer

Now add any other elements you might like

***Remember to save often***

Crop your image, so that you are getting ride of all excess canvas

Re-size your image so that it is no longer than 650 on it's longest side

Now add your copyright

Save image as a png file.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
This tut was written on March 17, 2013
All links were active at time of posting.
I would love to see your finished work.
Email: lostdarkangel13@gmail.com
If any problems arise please contact me, thanks again.
------------------------------------------------------------------------------
------------------------------------------------------------------------------